gi1401 thru gi1404 vishay general semiconductor document number: 88623 revision: 07-nov-07 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 ultrafast plastic rectifier features ? glass passivated chip junction ? ultrafast recovery time ? low switching losses, high efficiency ? low leakage current ? high forward surge capability ? solder dip 260 c, 40 s ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications for use in high frequency rectifier of switching mode power supplies, inverters, freewheeling diodes, dc-to-dc converters, and other power switching application. mechanical data case: to-220ac epoxy meets ul 94v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 e3 suffix for consumer grade, meets jesd 201 class 1a whisker test, he3 suffix for high reliability grade (aec q101 qualified), meets jesd 201 class 2 whisker test polarity: as marked mounting torque: 10 in-lbs maximum primary characteristics i f(av) 8.0 a v rrm 50 v to 200 v i fsm 125 a t rr 35 ns v f 0.895 v t j max. 150 c case pin 2 pin 1 to-220ac 1 2 maximum ratings (t a = 25 c unless otherwise noted) parameter symbol gi1401 gi1402 gi1403 gi1404 unit maximum repetitive peak reverse voltage v rrm 50 100 150 200 v maximum rms voltage v rms 35 70 105 140 v maximum dc blocking voltage v dc 50 100 150 200 v maximum average forward rectified current at t c = 125 c i f(av) 8.0 a peak forward surge current 8.3 ms single half sine-wave superimposed on rated load i fsm 125 a operating and storage temperature range t j , t stg - 65 to + 150 c
gi1401 thru gi1404 vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88623 revision: 07-nov-07 2 notes: (1) thermal resistance from junction to ambient in free air, no heatsink (2) thermal resistance from junction to case and ambient mounted on heatsink note: (1) automotive grade aec q101 qualified ratings and characteristics curves (t a = 25 c unless otherwise noted) electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol gi1401 gi1402 gi1403 gi1404 unit maximum instantaneous forward voltage i f = 4 a i f = 8 a i f = 4 a i f = 8 a t j = 25 c t j = 25 c t j = 100 c t j = 100 c v f 0.900 0.975 0.800 0.895 v maximum dc reverse current at rated dc blocking voltage t c = 25 c t c = 100 c i r 5.0 150 a maximum reverse recovery time i f = 0.5 a, i r = 1.0 a, i rr = 0.25 a t rr 35 ns typical junction capacitance 4.0 v, 1 mhz c j 85 pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol gi1401 gi1402 gi1403 gi1404 unit typical thermal resistance (1, 2) r ja r jc 15 2.2 c/w ordering information (example) package preferred p/n unit weight (g) package code base quantity delivery mode to-220ac gi1401-e3/45 1.80 45 50/tube tube to-220ac gi1401he3/45 (1) 1.80 45 50/tube tube figure 1. maximum forward current derating curve 0 6 8 12 10 75 50 25 0 100 125 150 4 2 a v erage for w ard re ctified c u rrent (a) case temperat u re (c) resisti v e or ind u cti v e load infinite heatsink mo u nting, t c free air rating, t a p. c . b . m o u nting figure 2. maximum non-repetitive peak forward surge current 0 25 50 75 150 125 100 1 100 10 nu m b er of cycles at 60 hz peak for w ard s u rge c u rrent (a) t c = 125 c 8 .3 ms single half sine- w a v e
gi1401 thru gi1404 vishay general semiconductor document number: 88623 revision: 07-nov-07 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 package outline dimensions in inches (millimeters) figure 3. typical instantaneous forward characteristics figure 4. typical reverse leakage characteristics 0.4 0.6 0. 8 1.0 1.2 0.01 0.1 10 1 100 t j = 125 c t j = 25 c p u lse w idth = 300 s 1 % d u ty cycle instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) 60 40 20 0 100 8 0 percent of rated peak re v erse v oltage (%) 0.01 0.1 10 1 100 instantaneo u s re v erse leakage c u rrent ( a) t j = 100 c t j = 125 c t j = 25 c figure 5. typical junction capacitance re v erse v oltage ( v ) j u nction capacitance (pf) 0.1 10 1 100 100 1000 10 t j = 25 c f = 1.0 mhz v sig = 50 m v p-p to-220ac case pi n 2 pi n 1 0.635 (16.13) 0.625 (15. 8 7) 0.415 (10.54) max. 0.154 (3.91) dia. 0.14 8 (3.74) dia. 0.113 (2. 8 7) 0.103 (2.62) 0.370 (9.40) 0.360 (9.14) pi n 12 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.037 (0.94) 0.027 (0.6 8 ) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) 1.14 8 (29.16) 1.11 8 (2 8 .40) 0.560 (14.22) 0.530 (13.46) 0.110 (2.79) 0.100 (2.54) 0.350 ( 8 . 8 9) 0.330 ( 8 .3 8 ) 0.145 (3.6 8 ) 0.135 (3.43) 0.603 (15.32) 0.573 (14.55) 0.055 (1.39) 0.045 (1.14) 0.1 8 5 (4.70) 0.175 (4.44)
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
